TILT & SLIDE DOORS

Drewexim offers special tilt&slide doors with improved thermal insulation which can help you reduce the heat loss in your building and reduce the energy consumption which results in lower costs of energy. These doors  are slightly thicker than standard 68mm systems, the depth of both the frame and the sash is 88mm. Usually equipped with 2 or 3 gaskets and triple glazing with either Argon or Krypton to achieve the U value Ug=0,5 W/m²K.

Tilt & slide doors are another perfect solution which can be used in all types of interiors. When closed the door looks aesthetic and allows a lot of sunlight in. When open the door does not interfere with the interior of the house since the operable panel slides parallel to the other panels. This type of door allows to make considerably larger dimensions than traditional balcony doors.

THERMO WOOD

Drewexim presents new windows made of THERMO WOOD.

Thermo wood means wood which has been dried and then thermally modified. During this process the wood is treated with very high tempereture in a special chamber which influences the physical characteristics of the wood and its colour. The wood becomes darker, similar to some of the exotic species. The moisture contents of this wood is very low so it must be humidifed to the optimal level. Then the wood is left for about 2 weeks realease the internal tension.

The whole windows can be made of thermo wood or only their external side. Using thermo wood minimises the risk of moisture penetration inside the wood therefore there is no need for chemical impregnation of the wood. Thermo wood has a very natural and unique colour. For prodution of thermo wood windows we use pine wood, spruce, ash, beech and oak all FSC certified on request.

ANTIQUE WINDOWS

One of the innovations at Drewexim are antique oak windows. All of the available types and window systems can be finished this way. These windows are distressed by hand to add them a character and original appearance. The process is time-consuming as the windows are treated in many various ways to achieve a perfect result. They are one of a kind and every single unit always differs from the others. To emphasise the authenticity and aesthetics of these windows different types and colours of wax, oil and staining is available.

OUR CERTIFICATES

FSC Certificate - it is a confirmation issued by NEPCon within SmartWood program of Rainforest Alliance accredited by the FSC (Forest Stewardship Council) that the wood used for manufacturing comes from well managed forests so that conversion of forests or any other natural habitat is prohibited, no hazardous chemicals are used, no GMO (Genetically Modified Organisms) are used, international workers rights are respected, Human Rights with particular attention to indigenous people are respected. All pine products manufactured from Drewexim's laminated timber are FSC certified, other wood species certified on request.

More information at: www.fsc.org

RAL certificate - it is a confirmation issued by the German Institute For Window Techniques in Rosenheim (IFT) for the products and the producer saying that all the highest quality and technological norms are met. It is one of the very few certificates confirming the actual quality of the products and Drewexim is one of the very few companies that has been accredited with it since 1999.

More information at: www.window.de
The best energy efficient wooden windows in Poland - it is a diploma that certifies the production of the best energy efficient windows in Poland awarded according to "VIP -The best windows and doors" program of Infookno.pl
More information at: www.infookno.pl

Find out more on http://www.drewexim.pl/en/certificates

PASSIVE WINDOWS

Drewexim offers special windows with improved thermal insulation which can help you reduce the heat loss in your building and reduce the energy consumption which results in lower costs of energy. These windows are slightly thicker than standard 68mm systems, the depth of both the frame and the sash is 88mm. Usually equipped with 2 or 3 gaskets and triple glazing with either Argon or Krypton to achieve  U_g=0,5 W/m²K.

Standard energy-efficient window achieves U value approx. U_w=0,9 W/m²K. The biggest advantage of this system is very good thermal insulation with relatively low price.

CORNER WINDOWS

Corner windows do not have the corner post because the glass is sealed with another glass in the corner at 90 degrees or different angle. It allows for letting more light into the building, having nicer view through the window and improves the appearance of the whole building and elevation.

CURVED WINDOWS

Curved windows with curved glazing are definitely a very rare product offered by very few manufacturers. Technologically it is quite a challenge. However, the visual result of using such window is astonishing!

Drewexim - our goal is perfection!

Firma Drewexim Sp. z o.o. powstała w 1991 roku. Z powodzeniem sprzedajemy swoje produkty na wielu rynkach zagranicznych w całej Europie a także na innych kontynentach. Aby sprostać wymaganion tak wielu różnym klientom i gustom Drewexim poszczycić się może jedną z najszerszych ofert w branży na skale światową. Poza tym wszyscy pracownicy firmy nieustannie pracują nad ciagłym ulepszaniem swoich produktów, poszerzaniem oferty i podwyższaniem i tak bardzo wysokich już standardów. Nad koordynacją funkcjonowania firmy od samego początku aktywnie czuwają jej główni udziałowcy Prezes Andrzej Kozłowski i Wiceprezes Andrzej Kozłowski Jr.

Dwa zakłady produkcyjne firmy Drewexim o wielkości ponad 10 000 m2 rozmieszczone na gruntach o wielkości prawie 60 000 m2, w których zatrudnionych jest prawie 200 osób pracują wspólnie przy produkcji najwyższej jakości okien i drzwi. Nowoczesne maszyny i urządzenia typu CNC (sterowane i programowane komputerowo) i automatyczne linie lakiernicze typu flowcoating w połączeniu z wykwalifikowanym i doświadczonym zespołem stolarskim i pełną kontrolą jakości na każdym etapie produkcji gwarantują każdorazowe wytworzenie idealnych produktów.

Drewexim to okna i drzwi, wykonane na zamówienie w oparciu o oryginalne i indywidualne projekty. Nasze wyroby są jedyne w swoim rodzaju i niepowtarzalne.
Drewexim to świat wysokich technologii i funkcjonalności. Z nami najbardziej niewiarygodne pomysły stają się realne. Jesteśmy otwarci na nowe pomysły i trudne wyzwania.

Nasz cel to perfekcja!

Located in the picturesque city of Koszalin on the Baltic Sea, we specialize in the manufacture of all kinds of commercial and residential doors and windows.
With over 20 years experience in the industry we supply a wide variety of products to suit our various customers not just across Europe but worldwide.

At the heart of our success is a team of 200 people incl. highly skilled craftsmen who are dedicated to creating the highest quality products and providing the most professional service. To ensure the consistent high quality of our products we use the latest computerized (CNC) machinery and automatic spraying lines (flowcoating) in our two manufacturing plants spanning over 10 000 m2 where we also employ sophisticated checks to ensure that each and every component of our products has a perfect finish and works flawlessly.
Our aim is excellence and we are capable of designing and delivering products with limitless possibilities.

Drewexim was established by the Kozłowski family and since then has been run by the father and son who are the comapny's main shareholders.

Drewexim means windows and doors created on the basis of individual and original designs. Our products are one of a kind and unique.
Drewexim is a world of high technology and functionality. With us all the most unbelievable ideas become real. We are open to new concepts and challenges.

Our target is perfection!

Société Drewexim Sp. z o.o. a été créée en 1991. Nous vendons avec succès nos produits sur de nombreux marchés étrangers en Europe et autres continents. Pour répondre aux exigences de tant de clients et goûts différents, Drewexim peut se vanter d'une offre le plus large au secteur à l'échelle mondiale. En outre, tous les employés travaillent incessamment sur l'amélioration constante de nos produits, l’élargissant d’offre et la mise en valeur des normes, déjà très élevées. Depuis le début, principaux actionnaires : Président Andrew Kozłowski et Vice Président Andrew Kozłowski Jr. assurent la coordination de fonctionnement de l’entreprise.

Deux installations de fabrication de la société Drewexim, de la taille plus de 10 000 m2, situé sur un terrain de la taille près de 60 000 m2, qui emploie près de 200 personnes, travaillent ensemble dans la production des fenêtres et des portes de qualité supérieure. Machines modernes et des équipements de type CNC (contrôlés et programmés par l’ordinateur) et de lignes de vernissage automatiques de type flowcoating, en liaison avec une équipe de charpentiers qualifiés et expérimentés, et de contrôle complète de la qualité à chaque étape de production, assurent que à chaque fois nous produisons des produits parfaits.

Drewexim, ces sont les fenêtres et les portes fabriquées sur commande, basées sur des projets originaux et individuels. Nos produits sont uniques.

Drewexim, c’est un monde de haute technologie et la fonctionnalité.

Avec nous, les idées les plus invraisemblables deviennent réalité.



Notre objectif c'est la perfection!